How To Prune Your Own Tree
If you have a tree that needs to be pruned, you should consider doing this yourself. If you are not going to hire a professional to prune your tree, you need to know what steps you should take to do this. It is important that you know exactly what you have to do to ensure that you are safe while pruning your tree.
What You Should Prune
Before you start cutting your tree, you need to know what you should be pruning and what you should not be pruning. You need to remove any dead branches as well as any diseased branches. You should also look at pruning any branches that are rubbing against each other as they can cause wounds which become infected.
Making The Pruning Cut
If you are removing a large branch, you should do this in 3 steps. The first step will be to make an initial cut on the underside of the branch. This cut should be around 4 to 5 inches from the trunk of the tree. It is important that you not make this cut too close to the trunk. Here’s a great video to watch on how pruning a tree is done: https://youtu.be/FSpgnw97BHk.
The second step is to cut the branch off about 2 to 3 inches away from the initial cut. This second cut will be further from the trunk than the first. When you make this cut, the weight of the branch will cause it to fall and the initial cut is used to stop the bark from peeling down the trunk. If you have peeling bark, you will be creating a wound on your tree and increasing the stress the tree is under.
The last step to cutting large branch is to remove the remaining stump. This cut will need to be made just outside the collar of the branch. This is a slightly swollen area where the trunk and branch meet. There are many ways to have the maintenance of proper corrective cuts on tree limbs.
Pruning V-Shape Junctions
Narrow, V-shape junctions are weak and more likely to break off during a storm. This is why you need to remove one of the stems from these junctions. You can also hire a tree care service to handle all your tree care needs at https://www.facebook.com/HenrysTreeServiceFortWorth/. It is recommended that you do this while the tree is still young as it will stop these junctions from occurring.
When pruning these junctions, you need to make your initial cut around 4 to 5 inches above the union of the branches. The finishing cut should then be made approximately a quarter inch above the union. Tree trimming in your local fort worth area. If you have left the pruning too late and the limbs are larger, you will need to cut one side of the junction back to a lateral branch. This will allow the other side to dominate.
Protect The Buds
When you are pruning stems, you need to ensure that you do not cut halfway between buds. When this is done, the long section of the stem to the bud will wither and die. This is not only bad to look at, it will also invite insects and disease. It is recommended that you make your cut around a quarter inch above the bud to protect it.